
Bunn-O-Matic Corporation
11
LEFT OZ 36.0
QUIT YES
CALIBRATE FLOW ?
NO YES
SPRAY HEAD CAL ?
NO YES
Step4:Toactivatetheowratecheck,presstheBrewbuttonofthesideofthemachineyouwishtocheck.
Step 5: The valve will open for 60 seconds. Once all of the water has dripped out, input the volume into the brewer.
Check and Adjust the Bypass Valve Flow Rate
Step 1: Scroll to Calibrate Flow select Yes.
Step 2: Select No at the next screen to dispense from the brew valves.
Step 3: Select Yes at the next screen.
Step 4: Ensure the sprayhead and funnel are in place and put a container, measuring pitcher or server, underneath
the funnel, select Yes.
Step5:Toactivatetheowratecheck,presstheBrewbuttonofthesideofthemachineyouwishtocheck.
Step 6: The valve will open for 60 seconds. Once all of the water has dripped out, input the volume into the brewer.
The process needs to be repeated for both sides of the brewer if applicable.
Programming the Recipes with a Recipe Card
Every brewer will have a recipe programmed into the main
control board. Most often, if a technician is asked to modify a
brewer’s recipe it will be done using a recipe card. The recipe
card allows new programming data to be uploaded to the
brewer wirelessly.
The recipe card will contain all of the coffee parameters for the
customerscoffeeavorproleincluding:CoffeeName,Brew
Volumes, Bypass Percentages, Cycle Times, Initial On Times,
and Drip-Out Times.
To upload the recipe onto the brewer, remove the funnels and
place the card under the left hand funnel sensing coil. The ma-
chine will recognize the recipe card and prompt to upload the
recipe on the display.
TAG CONTAINS
RECIPE FOR
“COFFEE NAME”
SHOW QUIT SAVE
“COFFEE NAME”
SHOW QUIT SAVE
NAME:_________________
TAG CONTAINS RECIPE
Instructions for transfer to brewer.
• Remove both funnels.
• Hold tag under left sense coil.
• Display will show “TAG CONTAINS
RECIPE”
• Follow instructions on screens.
Today’s S pecial
NAME:_________________
TAG CONTAINS RECIPE
Instructions for transfer to brewer.
• Remove both funnels.
• Hold tag under left sense coil.
• Display will show “TAG CONTAINS
RECIPE”
• Follow instructions on screens.
Instructions for transfer to brewer.
• Remove both funnels.
• Hold tag under left sense coil.
• Display will show “TAG CONTAINS
RECIPE”
• Follow instructions on screens.
Today’s S pecial
BYPASS CAL ?
NO YES
CONTAINER RDY ?
QUIT YES
LEFT OZ 24.2
QUIT YES
Komentarze do niniejszej Instrukcji