Bunn SINGLE TF DBC Instrukcja Obsługi Pobierz pdf (Strona 31)

Page 31

BREW COUNTERS

This function allows the operator to track the

number of brew cycles completed. There are three

resettable counters, and one life counter that is not

resettable.

Procedures to view/reset the brew counters:

1. Press and hold the ® pad until the display reads

SET NEW RECIPES. Release the ®. Press and

release the ® pad until the display reads BREW

COUNTERS.

2. Pressing NO in this screen will advance to the next

function. Press YES to view the first brew counter.

This number represents the brew cycles initiated

since that counter was last reset.

3. To advance to the other counter, press and release

NEXT. The counters are as follows:

- total brews (resettable)

- total brews (non-resettable)

4. To reset the counter to zero (except for the non-

resettable counter), press and release RESET when

viewing the counter's screen.

5. When finished, press NEXT to advance counter

screens until the display reads BREW COUNTERS.

Press and release NO to advance to the next

function screen, or press and release the pad

on the front switch panel to exit the BREW

COUNTERS function and return to the MAIN

SCREEN.

P2448

FUNNEL DETECT ?

Procedure to set funnel lockout:

1. Press and hold the ® pad until the display reads

SET NEW RECIPES. Release the ®. Press and

release the ® pad until the display reads FUNNEL

DETECT.

2. NO or YES should be flashing to indicate the

current setting.

4. Select YES to prevent brewing if a Smart Funnel

is not correctly situated in the rails. If this function

is activated and a brew cycle is attempted with the

funnel not properly situated, the display will read,

FUNNEL NOT IN PLACE, until one is in place.

5. Select NO to allow brewing without a Smart Fun-

nel

in place. This is selected when brewing with

a funnel other than a Smart Funnel

(a regular

brew funnel).

6. When finished, press and release DONE. This will

retain the changes, exit this function screen and

advance to the next. Another alternative is to press

the pad located on the front switch panel to

exit the FUNNEL DETECT and return to the MAIN

SCREEN.

P2309

PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)

FUNNEL LOCKOUT

This function allows the operator to prevent the

start of a brew cycle if a Smart Funnel

is not posi-

tioned correctly in the funnel rails.

35879 082203

1 2 ... 26 27 28 29 30 31 32 33 34 35 36 ... 48 49

Komentarze do niniejszej Instrukcji

Brak uwag

Bunn SINGLE TF DBC Instrukcja Obsługi Strona 31

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Ekspresy do kawy Bunn SINGLE TF DBC